When it comes to upgrading the halogen low beam headlight bulbs to LEDs for the 2009 – 2012 Audi A3, special retainer clips are usually needed. But it is hard to find suitable H7 clips for these cars.
But, these Boslla H7 LED bulbs with customed clips will help you to upgrade your Audi A3 low beam headlight bulbs to LED very easily. Plug and play, no extra modification is needed, and 200% brighter than stock halogen!
Audi A3 H7 Low Beam LED Headlight Bulb – 72W 7200LM / Pair
No Dark Area
This H7 LED headlight bulb adopts new patent design flip chips, adding an extra diode on both sides to avoid the dark lighting area.
No Extra Clips Needed
Combined with the special custom adapter, no modifications are needed, and always firm and stable after installation.
Specifications
- 6500k White, 30W 3600LM Per Bulb
- 9 Pcs LED Chips, No Dark Spots
- Plug & Play, No Extra Clips Need
- Up to 30,000 Hours Lifespan
- 360° Adjustable Beam Angle
- IP67 Waterproof, All Weather Fit
- 1 Year Hassle-Free Warranty
CANBUS Adapters
Some cars, such as the 2007+ Dodge, Chrysler, Jeep, GMC, BMW, Mercedes-Bens, require the CANBUS adapters to be installed together to avoid the flicker or warning message.
To confirm if need CANBUS or not, just remove the original headlight bulb and check if the dashboard show BULB ERROR or not.
For American vehicles, we advise the Resistor decoder. For European vehicles, the Capacitor decoder.
Please contact us if you have any questions.
Nice and bright
These are amazing lights and very bright but I do get flashed by other drivers the occasional time because the lights shine high. And it was harder to install because I had to use 2 different adapters for them to fit my car so it was a lot of wire to stuff back into the headlight. But other than that I’m very happy with them and all the different modes. Good product, would recommend👍
These bulbs are pretty bright. The color change does make a difference between a regular night and driving in the rain. Have yet to test them in snow or fog though. Only problem I have is occasionally one bulb will be one setting advanced from the other. So one bulb will be white while the other is white and yellow. Then one is white and yellow while the other is solid yellow. Then one is solid white and the other is solid yellow. Leave the headlights off for about 30seconds and they reset.
Easy install and bright
Easy install and bright
Mutch better backing up needed vision increase
Much brighter than OEM. High beams have good width but not much throw distance. Alternating colors works nicely. Product itself is high quality. I watched a boslla sponsored video installation on a Jeep grand Cherokee like mine. I could not get the OEM compression ring to seat behind the bulb units. However, they have held nicely with their water seal rubber o ring in the lamp socket. There should also be an indication as which side is up. High beams need to project from above, and you can install the lamps upside down. They are very bright and light up the road ahead nicely, and seem to illuminate signage way ahead of time. I like them a lot and I’m looking forward to a 2,100 mile drive with them from Florida to Colorado after Christmas!
It is great light bulb. However, i have issue with one side is not on. And i have to switch side then it on. Or i have to shut it down for while before i can light back on.
Very bright, stable lighting. The LED light can be conveniently adjusted, so you can get the best light pattern. No codes or errors as I drive a 2019 VW GTI , North American model.
The price for the brightness is very good, let’s see how long they last. The pictures can’t show you how bright they are, but they are very close to the advertised LUMEN.
good value, install was slight tricky on the H9b socket, but I was able to sort it. instructions could be more detailed.