How to Install Boslla 180W LED Headlight Bulbs

180W 21600LM LED HEADLIGHT BULB BOSLLA

In recent years, LED headlight bulbs have gained popularity among car owners due to their energy efficiency and brighter illumination. The process of installing Boslla 180W LED headlight bulbs is relatively straightforward and can typically be accomplished by following a few simple steps. In this article, we will guide you through the process of installing LED headlight bulbs in a professional and efficient manner.

Correct Beam Angle

LED headlight bulbs have to be positioned correctly for a great output or beam pattern.

The diodes (LED chips) should always be in a side-to-side orientation, meaning, you should have one set of LEDs facing at 3 o’clock and the other set facing at 9 o’clock. This will allow a nice and even 360° light distribution throughout the housing creating an even beam of light as well as evenly filling up the housing.

BOSLLA 180W LED HEADLIGHT BULB INSTALLATION ORIENTATION 1

LED Bulbs Installation Steps

Once you have obtained the correct LED headlight bulbs, you can proceed with the installation process. Here is a step-by-step guide to help you install LED headlight bulbs with ease:

For H10,H11,9005,9006,9012 Bulb Sizes

BOSLLA 180W H11 9005 9006 9012 LED HEADLIGHT BULB INSTALLATION

For H1,H3,H4,H7,H13,9004,9007 Bulb Sizes

BOSLLA 180W H1 H3 H4 H7 H13 9004 9007 LED HEADLIGHT BULB INSTALLATION

Step 1: Prepare the necessary tools and equipment. Before beginning the installation, gather all the tools you will need. This typically includes a socket wrench, a screwdriver, and possibly a trim removal tool. Having the necessary tools ready will save you time and prevent unnecessary frustration during the installation process.

Step 2: Access the headlight assembly. To start, open the hood of your vehicle and locate the backside of the headlight assembly. Depending on the make and model of your car, you may need to remove a cover or access panel to reach the bulb sockets. Use the trim removal tool or screwdriver, as necessary, to gain access to the headlight assembly.

Step 3: Remove the old headlight bulb. Carefully disconnect the wiring harness from the old headlight bulb socket. Depending on your vehicle’s design, you may need to twist the bulb socket counterclockwise or squeeze the bulb socket retaining clip to release the old bulb. Once the old bulb is removed, set it aside in a safe place.

Step 4: Install the LED headlight bulb. Take the new LED headlight bulb and align the tabs or grooves on the bulb base with the corresponding slots in the bulb socket. Be cautious not to touch the bulb’s glass surface with your bare hands, as this could lead to premature failure. If necessary, use a tissue or gloves to handle the bulb. Once the bulb is properly aligned, gently insert it into the bulb socket and twist it clockwise to secure it.

Step 5: Connect the wiring harness. Reconnect the wiring harness to the new LED headlight bulb socket, ensuring a secure connection is made. It is crucial to double-check that the connections are tight to prevent any flickering or intermittent issues.

Step 6: Test the headlights. Prior to reassembling the headlight assembly, turn on the headlights to ensure that the new LED bulbs are functioning properly. If both headlights are illuminating without any issues, proceed with reassembling the headlight assembly.

Step 7: Reassemble the headlight assembly. Carefully place the headlight assembly cover or access panel back in place, ensuring that all clips and screws are securely fastened. Take your time during this step to avoid damaging any components or leaving any loose parts.

Congratulations! You have successfully installed LED headlight bulbs in your vehicle. Not only do LED headlight bulbs provide improved visibility and safety on the road, but they also contribute to energy conservation.

Find the Correct Bulb Size

Before we dive into the installation process, it’s important to note that LED headlight bulbs come in various types and sizes, depending on the make and model of your vehicle. It is crucial to determine the appropriate bulb size and style for your specific car before purchasing LED headlight bulbs. This information can usually be found in your vehicle’s owner’s manual or by checking with the Boslla Auto Bulb Finder.

180W LED Headlight Bulbs

In conclusion, installing LED headlight bulbs is a relatively simple process that can significantly enhance your driving experience. With the proper tools and following the step-by-step instructions provided in this article, you can successfully upgrade your headlights and enjoy the multitude of benefits that LED technology offers. Stay safe and enjoy the enhanced visibility provided by your new LED headlight bulbs.