H13 LED Headlight Bulb – 60W 7200LM 6500K White
Real Shots From Our Customers
Do your headlights dim or not bright enough?
If you want to see clearer at night or in the dark when you are driving, Boslla B1 LED Headlight Bulb will help you do so.
This Boslla Bullet B1 is with a total all-in-one design, is almost the same size as halogen bulbs, but 200% brighter than Halogen headlights. Plug and play, upgrade to a safer and more reliable LED light within minutes.
Make your headlights up to 2x brighter with Boslla LED bulbs!
H13 LED Headlight Bulb Specs
- Color Temps: 6500k
- Wattage: 30W per bulb
- Lumens: 3600 per bulb
- Lifespan: 30,000 hours
- Voltage Range: DC 9v – 12v
- Installation: Plug & Play
- 1-Year Warranty – Free Replacements
- Hassle Free 30-Day Easy Return
Boslla LED vs. Halogen Bulb
Low Beam Brightness
High Beam Brightness
H13 LED Headlight Bulb Benefits
- 200% Brighter than Halogen
30W 3600LM 6500K Cool White, increase visibility with bright LEDs up to 200%. The Boslla Bullet B1 series exhibits higher brightness, wider field of view, and better light pattern, without dazzle oncoming drivers, plays well in both in the reflector or projector headlight.
- Anti-glare, No Dark Area
Boslla Bullet B1 adopts new patent design flip chips, adding an extra diode on both sides to avoid the dark lighting area. The led circuit board is only 0.9mm thick, and the ultra-thin two-sided design emits light closer to a 360 degree halogen lamp.
- Cooling System, Longer Lifespan
Hydraulic high-speed cooling fan, fan sound less than 25 decibels. There is no fan noise in the car, giving you a better driving experience. It comes with firm 6063 aviation aluminum with matte processed surface and multi-directional heat dissipation. Also with intelligent IC control, the 8500 RPM cooling fan makes the whole LED bulb more stable ever.
- Plug & Play, Easy Installation
It has almost the same size and the same focal point as the halogen bulb and is more compact than other LED headlight bulbs on the market., plug and play, easy to install. Enough space for keeping the original dust cover.
No Dark Area, Perfect Beam Pattern
No more blinding glare
Warning Canceller / Anti-Flicker [Important Note]
Please note that some vehicles (such as the 2007+ Dodge, Chrysler, Jeep, GMC, BMW, Mercedes-Bens and more) maybe require a set of warning cancellers to be installed.
Warning cancellers, also known as resistors or capacitors, prevent on-dash errors that may occur on vehicles with complex onboard computers.
To confirm if need DECODER or not, just remove the original headlight bulb and check if the dashboard show BULB ERROR or not. For American vehicles, we advise the Resistor decoder while for European vehicles, the Capacitor decoder.
Oscar D. (Verified Buyer) –
Excelente producto se ven geniales estoy satisfecho gracias
Blaine V. (Verified Buyer) –
Gabriel Orcon (Verified Buyer) –
Chad Heimerl (Verified Buyer) –
Amazingly bright headlights, without the scatter effect!
R (Verified Buyer) –
Exceeded my expectations. Likely to make a third purchase. Original purchase was done through Amazon site
Benton Hopson (Verified Buyer) –
Ethan O. (Verified Buyer) –
Quality product and significant upgrade from traditional headlight bulbs. I love the brightness and the color.
Dale Berger (Verified Buyer) –
It’s been 28 days an unfortunately I can’t give a review on the product because I still have not received them.
Support (store manager) –
We checked the item was delivered on 28th, would you please double-check? Please check your email to know more details, we are ready to help.
Anonymous (Verified Buyer) –
my car look new when i put this on my ford focus 2008 it’s brighter than the newer car today
Doug Scannapieco (Verified Buyer) –
Happy with the product, just took an awful long time to deliver.
Jaromir Parolek –
They really work. I put them on the truck and my wife’s jeep.
Tomas Svitek –
Ultra-thin, the beam does not leave shadows! It’s really easy to install, and it’s an obvious upgrade to the inventory. Would definitely recommend them, no problems after a few months.
avery smith –
Due to the dust cover, it is not easy to install on 03 CRV, but other than that
Bright and good quality.
Felix Huang –
After receiving this product, I pressed it to my car. When we drive at night, the lightinig will be brighter, which also makes our travel safer, the price is also very affordable, it is worth buying.
Ionut Neacsu –
The goods arrive very quickly, the light you hold is a bit heavy, the hand feels smooth and comfortable, and it is easy to install because it is not difficult and saves money. If the quality problem can be replaced, you can buy it with confidence. It took me half an hour to make it. At night, the lighting is very different from before, super strong, super LED headlamp, very bright and concentrated light, much better than the original headlamp, easy to install.
Seyfulla Ahmadov –
Very bright, very easy to install, just plug in to play the existing light plug. Very suitable for my wife’s 09 Ford Flex.
Ocskay Tamas –
The ease of installation left a deep impression on me.
I like the crisp white light, even brighter than I expected.
Raineri Guillaume –
The lights are bright and easy to install. With other LED lights, their effect is much better, and you won’t lose the same radio receiving capability as other signal lights. I will buy these again.
Ivan LESKITS –
No negative effects…absolutely all positive results about this product.
Milan Svrcek –
Excellent value for money. It only takes 20 minutes to install in the 2011 Ford Mustang. The dim yellow halogen lamp changes to a bright white LED. They don’t bother other drivers either. I can see it again at night.
Antti Kovanen –
High-quality bulbs are very easy to install in the Chevrolet Cruze and provide very good lighting.
Darie Iulian –
I installed these on my 2008 Mitsubishi Eclipse. It is installed directly, plug and play, no modification is required. Just take out the old bulb and insert it. The color is pure white, which looks cool. In terms of brightness, they are almost the same as standard halogens, perhaps brighter. They are not as bright as HID bulbs, but they certainly emit the same or more light than halogens. The lights will not cast shadows on oncoming drivers.
If you want to change the appearance of your old yellow headlights, this is a great product.
Yakimchuk Vp –
It looks great and is great value for money. Easy installation in my 2014 Wrangler.
Thiery L Caron –
Quite easy to install, very bright, 10 times better/brighter than factory headlights.
POUX Nicolas –
These bulbs are amazing. I put them in my 2011 F150, and the light output completely changed night driving. Great product.
Saad Altheiby –
How does this affect my night vision? This is a great company and it is easy to work with you. If there is a problem, they will help you solve it as soon as possible. I will buy more other vehicles from them.
Konrad Wojda –
If you have a Jeep Renegade, the wiring will be tilted backwards, which means that the low point will be higher and the high point will be lower. The simple fix is to unplug the two wires in the car harness and swap them for a few minutes. It’s easy. The lights do not flicker and are better than the OEM that comes with the new Jeep.
Diego Murillo –
Super easy to install, bright and effective. I can see street signs at least a mile away in the country. Had to color my windshield from reflections.
Jesper Kilde –
The effect so far is pretty good. They need to perform some operations to fix it properly, but this is to be expected when replacing the bulb and/or after-sales parts.
Ruslan Safanov –
Excellent product. Very good lighting and quality.
Zsolt Kovacs –
Used on F250 Super Duty and can now see very well when traveling for work.
Jin Koshino –
Easy-to-install SUV replacement LED at a favorable price.
Cinar Regayyip –
Under high beams, I like the sleek appearance and brightness. If I live longer, I will buy another pair.
Abbas Deniz –
Light up the roof at 700 feet in front of my 2011 Ram 1500. If these can’t stop it, I will buy it again!
I installed them on my mustang, much brighter than the stock.
Pavlov Alexander –
I put them in my 2008 BULLITT.
They are great! Great progress! Make sure to index them correctly. Remove the three screws, and then screw them into the correct positions. Then reinstall the screws. The blade on which the LED is fixed should be placed vertically so that the LED emits light to the side. The instructions are not clear. The mine was driven away by a dear. I installed them, took a look, pulled them out and adjusted them. simple. It took about 5-10 minutes. As far as I’m concerned, I don’t even have to re-aim the headlight assembly.
I will buy some for my 2014 Outback at that time, and the fog lights have been replaced. Again, a huge difference!