Ready to upgrade those old halogen bulbs in your 2022-2023 Toyota 4Runner LED Headlight bulbs? It’s a great way to enhance your vehicle’s visibility, safety, and style. LED bulbs offer brighter illumination, greater energy efficiency, and a longer lifespan compared to traditional halogen bulbs. Let’s go to check out the installation steps!
Table of Contents
2022-2023 Toyota 4Runner LED Headlight Bulb Size Guide
2022-2023 Toyota 4Runner LED Headlight Bulb Size
Front headlight bulb size
Low beam: H11
High beam: 9005
Front fog light: H11
Turn Signal & Marker Bulb Sizes
Front Turn Signal Bulb: 7440 / 7443
Rear Turn Signal Bulb: 7440 / 7443
Parking Light: 7440 / 7443
Front Side Marker: 194 / 168
Other Bulb Sizes
Back up light: 912 / 921
Interior Door Light: 194 / 168
License Plate Light: 194 / 168
Map Light: 194 / 168
Vanity Mirror Light: 194 / 168
If you choose to upgrade your old halogen bulbs to new LED bulbs, it’s best to refer to the original bulb or the vehicle’s direct owner’s manual to confirm you have the correct Toyota 4Runner LED Headlight headlight bulb size.
LED Headlight Bulbs Installation Steps
Step 1: Locate the Low/ High/ Fog light, Open the hood, and locate the back of the headlight assembly. The low beam bulb is typically housed in the outermost part of the assembly; The high beam bulb is usually situated closer to the center of the headlight assembly; For the front fog light, depending on your 4Runner’s configuration, you may need to remove the front bumper or access the fog light housing from underneath the vehicle. Consult your owner’s manual for specific instructions.
Step 2: Remove the Old Bulb: Twist the bulb socket counterclockwise to remove it from the headlight housing. Carefully pull the bulb out of the socket.
Step 3: Install the New LED Bulb: Handle the new LED bulb with gloves to avoid touching the glass. Insert the new bulb into the socket and twist it clockwise to secure it in place.
Step 4: Reconnect the Headlight Assembly Socket: Once the new bulb is installed, reconnect the positive, and negative terminal of the plug and test the lights to ensure proper installation.
Congratulations! You have successfully installed LED headlight bulbs in your vehicle. Not only do LED headlight bulbs provide improved visibility and safety on the road, but they also contribute to energy conservation.
Final Check Adjust the LED Light Bulb Angle
1: Check Alignment: Ensure that the new LED bulbs are properly aligned. Misaligned headlights can cause glare and reduce visibility.
2: Test All Lights: Turn on the headlights and fog lights to verify that all bulbs are working correctly. Check for consistent illumination and proper beam patterns.
3: Secure Components: Ensure all components and covers are securely in place. Close the hood and make sure the battery terminals are tightly connected.
Conclusion
Replacing vehicles 2022-2023 Toyota 4Runner LED Headlight bulbs is a simple process that can greatly enhance your driving experience. With their increased brightness, energy efficiency, and modern appearance, LED bulbs are a worthwhile upgrade for any vehicle. Follow this guide to ensure a smooth, successful installation and enjoy the benefits of superior lighting on your adventures.