Discover our H4 LED headlight bulbs with options for single white (6500K) or 3-in-1 color modes (6500K / 4300K / 3000K). Up to 180W and 21,600 lumens output for maximum road visibility and safer night driving.
H4 bulbs are widely used in vehicles with a single bulb for both high and low beams.
Boslla H4 LED upgrades are designed to maximize this dual-function setup, providing:
Powerful dual-beam output — crisp low beam for city driving, high beam for long-range visibility
White and Tri-Color options — including our signature 3-color switchable series (white/yellow/yellow+)
Perfect beam pattern — optimized cutoff for low beam, wide spread for high beam
Plug-and-play fit — compact size, no extra wiring
Built to last — with high thermal efficiency and waterproof design
Whether you're replacing factory halogens or upgrading for weather versatility, Boslla H4 delivers adaptive lighting with superior clarity.
| Product | Wattage | Lumens | Color | Best For |
|---|---|---|---|---|
| Chameleon C4 | 100W | 12000LM | 6500K/4300K/3000K | All-weather driving |
| Bullet B4 | 60W | 7200LM | 6500K/4300K/3000K | Balanced daily use |
| Bull NL | 180W | 21600LM | 6500K White | Maximum brightness, off-road |
| Spider ND | 140W | 16800LM | 6500K White | City + highway driving |
| Rocket NR | 110W | 13200LM | 6500K White | Versatile everyday use |
| Wireless V05 | 100W | 12000LM | 6500K White | Balanced performance |
| Rabbit NT | 80W | 9600LM | 6500K White | Budget-friendly upgrade |
Q: What’s special about H4 bulbs?
A: H4 bulbs are dual-beam, meaning they handle both low and high beam from a single bulb. They’re commonly found in motorcycles, trucks, and older cars with reflector housings.
Q: Do Boslla H4 LED bulbs support both beams?
A: Yes! All Boslla H4 LEDs are true dual-beam LEDs, with separate chips and beam control for accurate high/low performance.
Q: What’s the advantage of Boslla’s 3-color H4 bulbs?
A: Our 3-color H4 LEDs let you switch between:
6500K Cool White (normal driving)
4300K Warm White (rainy or foggy roads)
3000K Yellow (severe weather or off-road)
Perfect for adapting to changing conditions without swapping bulbs.
Q: Will these work with both reflector and projector headlights?
A: Yes, Boslla H4 LEDs are beam-optimized for both reflector and projector housings — ensuring no glare and sharp cutoffs.
Q: Is installation difficult?
A: Not at all. Our H4 bulbs are designed for plug-and-play installation, usually in under 15 minutes. No extra wiring or resistors are needed for most vehicles.
Q: Will I need a CANBUS decoder?
A: Some newer vehicles may need a CANBUS decoder to prevent flickering or error messages. Boslla offers compatible decoders if needed.
