Our customers love our products
Read reviews from real customers below, and see what our customers are saying about us!
| 5 star | 91 | 91% |
| 4 star | 8 | 8% |
| 3 star | 1 | 1% |
| 2 star | 0 | 0% |
| 1 star | 0% |
Customer Images
CHRIS
I installed these in a 2013 FIAT 500 for fog lights. I had an issue with installing these. Fitament was too tight. I had to move the bushing from my old leds bubls to these and they installed fine. I also have the 9012 Chameleon installed for my headlights.
CHRIS
I installed these in a 2013 FIAT 500 for fog lights. I had an issue with installing these. Fitament was too tight. I had to move the bushing from my old leds bubls to these and they installed fine. I also have the 9012 Chameleon installed for my headlights.
CHRIS
I installed these in a 2013 FIAT 500 for fog lights. I had an issue with installing these. Fitament was too tight. I had to move the bushing from my old leds bubls to these and they installed fine. I also have the 9012 Chameleon installed for my headlights.
chris
Great lights! Much better than my Amazon leds. Could do with out the 4300K. These are installed in a 2013 fiat 500. No issues.
chris
Great lights! Much better than my Amazon leds. Could do with out the 4300K. These are installed in a 2013 fiat 500. No issues.
chris
Great lights! Much better than my Amazon leds. Could do with out the 4300K. These are installed in a 2013 fiat 500. No issues.
Anonymous
Happy with them so far. Only thing I’d change would be to increase the difference between the brake and running light. Photo below with signal/reverse/running lights on.
Michael Perullo
Much brighter than OEM. High beams have good width but not much throw distance. Alternating colors works nicely. Product itself is high quality. I watched a boslla sponsored video installation on a Jeep grand Cherokee like mine. I could not get the OEM compression ring to seat behind the bulb units. However, they have held nicely with their water seal rubber o ring in the lamp socket. There should also be an indication as which side is up. High beams need to project from above, and you can install the lamps upside down. They are very bright and light up the road ahead nicely, and seem to illuminate signage way ahead of time. I like them a lot and I¡¯m looking forward to a 2,100 mile drive with them from Florida to Colorado after Christmas!
Michael Perullo
Much brighter than OEM. High beams have good width but not much throw distance. Alternating colors works nicely. Product itself is high quality. I watched a boslla sponsored video installation on a Jeep grand Cherokee like mine. I could not get the OEM compression ring to seat behind the bulb units. However, they have held nicely with their water seal rubber o ring in the lamp socket. There should also be an indication as which side is up. High beams need to project from above, and you can install the lamps upside down. They are very bright and light up the road ahead nicely, and seem to illuminate signage way ahead of time. I like them a lot and I¡¯m looking forward to a 2,100 mile drive with them from Florida to Colorado after Christmas!
Michael Perullo
Much brighter than OEM. High beams have good width but not much throw distance. Alternating colors works nicely. Product itself is high quality. I watched a boslla sponsored video installation on a Jeep grand Cherokee like mine. I could not get the OEM compression ring to seat behind the bulb units. However, they have held nicely with their water seal rubber o ring in the lamp socket. There should also be an indication as which side is up. High beams need to project from above, and you can install the lamps upside down. They are very bright and light up the road ahead nicely, and seem to illuminate signage way ahead of time. I like them a lot and I¡¯m looking forward to a 2,100 mile drive with them from Florida to Colorado after Christmas!
Sorry, no reviews match your current selections
Great lights! Much better than my Amazon leds. Could do with out the 4300K. These are installed in a 2013 fiat 500. No issues.
Just installed these into my 2015 GTI with halogen housings. I believe the install is okay but I cannot fully rotate so that the LEDs are perfectly facing side to side. There is a very slight angle for both driver and passenger. The high beams seated without issue. Please let me know what I should do.. No errors are showing in vehicle and lights are bright but getting flashed everywhere and I think it’s due to the bulbs not fully seated.
They’re all around great lights my only slight complaint is that they don’t stay on the selected color after shutting the car off other than that I love them
I installed these in a 2013 FIAT 500 for fog lights. I had an issue with installing these. Fitament was too tight. I had to move the bushing from my old leds bubls to these and they installed fine. I also have the 9012 Chameleon installed for my headlights.
I love the bulbs! An ideal bulb would be 5000k-4300k and 3000. Ish K? I’m not a fan of 6000-or more for rainy dark nights, although these have the option of changing the 4300k ..I’d buy them again, let’s see how long they last.