When it comes to upgrading the halogen low beam headlight bulbs to LEDs for the 2009 – 2012 Audi A3, special retainer clips are usually needed. But it is hard to find suitable H7 clips for these cars.
But, these Boslla H7 LED bulbs with customed clips will help you to upgrade your Audi A3 low beam headlight bulbs to LED very easily. Plug and play, no extra modification is needed, and 200% brighter than stock halogen!
Audi A3 H7 Low Beam LED Headlight Bulb – 72W 7200LM / Pair
No Dark Area
This H7 LED headlight bulb adopts new patent design flip chips, adding an extra diode on both sides to avoid the dark lighting area.
No Extra Clips Needed
Combined with the special custom adapter, no modifications are needed, and always firm and stable after installation.
Specifications
- 6500k White, 30W 3600LM Per Bulb
- 9 Pcs LED Chips, No Dark Spots
- Plug & Play, No Extra Clips Need
- Up to 30,000 Hours Lifespan
- 360° Adjustable Beam Angle
- IP67 Waterproof, All Weather Fit
- 1 Year Hassle-Free Warranty
CANBUS Adapters
Some cars, such as the 2007+ Dodge, Chrysler, Jeep, GMC, BMW, Mercedes-Bens, require the CANBUS adapters to be installed together to avoid the flicker or warning message.
To confirm if need CANBUS or not, just remove the original headlight bulb and check if the dashboard show BULB ERROR or not.
For American vehicles, we advise the Resistor decoder. For European vehicles, the Capacitor decoder.
Please contact us if you have any questions.
Se fundió alas dos semanas no lo recomiendo
Design is great, but one led at a time will change “color” at random and never staying just in the default setting.
Hoping boslla will make this right, because so far I’ve been unimpressed and even went back to my halogens until I figure out what to do next.
Every time it rains I have issues with the lights not being the same color or operating on their own
Oedered on 11/29/20 havenot received the item yet as of 11/15/2020. Review of product will be given when I get to install and use it.
So I came across these lights and when I heard about the 4 color option I was sold especially since I wanted to run 3k heads but also loved the fact that I can switch back to normal 6k color. So I was super excited about getting these and installing them. After receiving them and installing them I was let down for the price that these are going for the craftsmanship fall off on the mounts when locking the lights into the headlight housing they are loose and don’t fit snug or tight. So when they are in the housing they shake or Wobbles witch in turn cast off shaky lights this is something that need to be fixed or corrected maybe I got a bad set or something. Not happy with the fitment my $60 Amazon lights have a much better fitment then these $140 lights.
I purchased 3 sets of the Boslla B1 LED. 1 9005 and 2 H7. 2 of the sets had 1 dead bulb out of the box. So, I’m 1 for 3 with this product, which isn’t a good average. They seem to be good LED bulbs, when they work. It has to be either a bad batch or poor quality control. Someone needs to address this asap.
I purchased the bullet b4’s about a year ago. Definitely a game changer. Although after just 8 months one of the bulbs stopped working.
Headlights work . You just can’t listen to the radio. I have tried the resistor decoder and the capacitor decoder.I have spent $199 us dollars and I can not listen to the radio with the lights on.
2018 Dodge RAM…
Messes with the radio, and bluetooth. Unless you’re using a cable, your audio is gonna skip. HD radio will not successfully tune. Flicker is present in lights with no CAN-BUS. After CAN-BUS, flicker is fixed, but audio issues remain.